New Valterra 6" PVC Gate Valve – Slip Hub Fittings with Stainless Steel Paddle

Description

Valterra 6″ PVC Gate Valve – Slip Hub Fittings with Stainless Steel Paddle
This slide gate valve has low pressure & vacuum applications
for hog/poultry sheds, slurry ponds, aquaculture, flood
irrigation/secondary containment and overflow, waste water control, fish
hatcheries/transport, cooling towers as well as many general purpose
applications. Please note that this valve design has an open and closed
pressure rating. Because the stainless steel paddle can flex with
flowing water it is not good for throttling water or trying to close the
valve with fast moving water – thus the low mid-flow cut off water
pressure of 2.5 pounds per square inch (psi). These slide valves are
sometimes referred to as “knife or guillotine” gate valves and are great
in low pressure applications since they are full flow, quick opening,
and are generally a much lower cost than high pressure rated valves.
They work well with soft debris like waste but small hard debris can
settle in the bottom of the valve seat/slot and prevent it from closing
completely. They can easily be repaired by unbolting and replacing the
gate seals or valve body and the handle can also be replaced. The
Valterra 6601 gate valve has 6″ slip/hub fittings which receive 6″ PVC
pipe. The white Poly Vinyl Chloride (PVC) body and hub fittings are
resistant to corrosion and mild chemicals as are the thermoplastic
vulcanizate (TPV) seals. Its shaft, handle, paddle and hardware are made
of 304 stainless steel. It has a maximum pressure rating in the open
position of 6 psi and 10 psi in the closed position, a mid-flow cut off
maximum pressure rating of 2.5 psi, and a maximum temperature rating of
167 degrees F (75 degrees C). See Gate Valve Measurement chart for
dimensions and Head Pressure chart for determining the pressure based on
the height of water being held back.
APPLICATIONS: Ideal for low pressure and
vacuum applications as a quick shut-off valve – Can be used with air or
clean, gray or waste water – See description for specific applications
KEY FEATURES: Unrestricted flow – Full port – 304 Stainless Steel shaft/paddle and handle
SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed – PVC with female Slip/Hub fittings which receive 6″ PVC pipe
REPAIRS: Bolted assembly allows for replacement of valve body and gate seals – Handle can be replaced by removing C-clip
30
day return policy – Item must be returned in the same condition in which it was
received, and it should include all items that were in the original
package.
I am unable to cover any
warranty issues.
Return Instructions
If you would like to return
your new, unopened (if factory sealed), and unused item:
From within
My eBay
,
click
Purchase History
.
Find the item you ordered.
Below the
Leave Feedback
button, click [More Actions] > [Return This Item].
Select from the following 5
reasons.
* The reason you pick has no impact on you or your refund
amount, but it has a big impact on me as a seller. Other selected reasons
may delay the refund process per an internal investigation and appeal to
eBay.
Doesn’t Fit
Changed My Mind
Found a Better Price
Just Didn’t Like it
Ordered by Mistake
Add return specifics (not
required)
.
Click [Request a Return].
If you choose to use your own
shipping label for return you MUST UPLOAD the tracking number to the
auction.
If
the returned item is used, damaged, or missing any parts, or is damaged during
return shipping because it wasn’t packaged correctly, Ebay allows a deduction
of up to 50% from the refund to recover the lost value of the item.
Ebay will also take care of any issues
directly with the buyer including removing any negative and neutral feedback,
defects, and open cases in service metrics.
Each purchased item has unique identifiers and/or serial numbers
recorded to combat any fraudulent return
Customer
Satisfaction is my top priority.
If you
have a problem with your purchase please contact me for resolution before
leaving negative feedback or anything less than a 5 star rating.
I work hard for my feedback and want your
purchase to be what you expected!
I inspect open box items to the best of my
ability.
If you have any issues/concerns
with the item upon receipt please contact me immediately for resolution.